Kapisi/roles/WebServer/files/modsec.conf

969 lines
38 KiB
Plaintext
Raw Normal View History

# -- Rule engine initialization ----------------------------------------------
# Enable ModSecurity, attaching it to every transaction. Use detection
# only to start with, because that minimises the chances of post-installation
# disruption.
#
SecRuleEngine DetectionOnly
# -- Request body handling ---------------------------------------------------
# Allow ModSecurity to access request bodies. If you don't, ModSecurity
# won't be able to see any POST parameters, which opens a large security
# hole for attackers to exploit.
#
SecRequestBodyAccess On
# Enable XML request body parser.
# Initiate XML Processor in case of xml content-type
#
SecRule REQUEST_HEADERS:Content-Type "^(?:application(?:/soap\+|/)|text/)xml" \
"id:'200000',phase:1,t:none,t:lowercase,pass,nolog,ctl:requestBodyProcessor=XML"
# Enable JSON request body parser.
# Initiate JSON Processor in case of JSON content-type; change accordingly
# if your application does not use 'application/json'
#
SecRule REQUEST_HEADERS:Content-Type "^application/json" \
"id:'200001',phase:1,t:none,t:lowercase,pass,nolog,ctl:requestBodyProcessor=JSON"
# Sample rule to enable JSON request body parser for more subtypes.
# Uncomment or adapt this rule if you want to engage the JSON
# Processor for "+json" subtypes
#
#SecRule REQUEST_HEADERS:Content-Type "^application/[a-z0-9.-]+[+]json" \
# "id:'200006',phase:1,t:none,t:lowercase,pass,nolog,ctl:requestBodyProcessor=JSON"
# Maximum request body size we will accept for buffering. If you support
# file uploads then the value given on the first line has to be as large
# as the largest file you are willing to accept. The second value refers
# to the size of data, with files excluded. You want to keep that value as
# low as practical.
#
SecRequestBodyLimit 13107200
SecRequestBodyNoFilesLimit 131072
# What to do if the request body size is above our configured limit.
# Keep in mind that this setting will automatically be set to ProcessPartial
# when SecRuleEngine is set to DetectionOnly mode in order to minimize
# disruptions when initially deploying ModSecurity.
#
SecRequestBodyLimitAction Reject
# Maximum parsing depth allowed for JSON objects. You want to keep this
# value as low as practical.
#
SecRequestBodyJsonDepthLimit 512
# Maximum number of args allowed per request. You want to keep this
# value as low as practical. The value should match that in rule 200007.
SecArgumentsLimit 1000
# If SecArgumentsLimit has been set, you probably want to reject any
# request body that has only been partly parsed. The value used in this
# rule should match what was used with SecArgumentsLimit
SecRule &ARGS "@ge 1000" \
"id:'200007', phase:2,t:none,log,deny,status:400,msg:'Failed to fully parse request body due to large argument count',severity:2"
# Verify that we've correctly processed the request body.
# As a rule of thumb, when failing to process a request body
# you should reject the request (when deployed in blocking mode)
# or log a high-severity alert (when deployed in detection-only mode).
#
SecRule REQBODY_ERROR "!@eq 0" \
"id:'200002', phase:2,t:none,log,deny,status:400,msg:'Failed to parse request body.',logdata:'%{reqbody_error_msg}',severity:2"
# By default be strict with what we accept in the multipart/form-data
# request body. If the rule below proves to be too strict for your
# environment consider changing it to detection-only. You are encouraged
# _not_ to remove it altogether.
#
SecRule MULTIPART_STRICT_ERROR "!@eq 0" \
"id:'200003',phase:2,t:none,log,deny,status:400, \
msg:'Multipart request body failed strict validation: \
PE %{REQBODY_PROCESSOR_ERROR}, \
BQ %{MULTIPART_BOUNDARY_QUOTED}, \
BW %{MULTIPART_BOUNDARY_WHITESPACE}, \
DB %{MULTIPART_DATA_BEFORE}, \
DA %{MULTIPART_DATA_AFTER}, \
HF %{MULTIPART_HEADER_FOLDING}, \
LF %{MULTIPART_LF_LINE}, \
SM %{MULTIPART_MISSING_SEMICOLON}, \
IQ %{MULTIPART_INVALID_QUOTING}, \
IP %{MULTIPART_INVALID_PART}, \
IH %{MULTIPART_INVALID_HEADER_FOLDING}, \
FL %{MULTIPART_FILE_LIMIT_EXCEEDED}'"
# Did we see anything that might be a boundary?
#
# Here is a short description about the ModSecurity Multipart parser: the
# parser returns with value 0, if all "boundary-like" line matches with
# the boundary string which given in MIME header. In any other cases it returns
# with different value, eg. 1 or 2.
#
# The RFC 1341 descript the multipart content-type and its syntax must contains
# only three mandatory lines (above the content):
# * Content-Type: multipart/mixed; boundary=BOUNDARY_STRING
# * --BOUNDARY_STRING
# * --BOUNDARY_STRING--
#
# First line indicates, that this is a multipart content, second shows that
# here starts a part of the multipart content, third shows the end of content.
#
# If there are any other lines, which starts with "--", then it should be
# another boundary id - or not.
#
# After 3.0.3, there are two kinds of types of boundary errors: strict and permissive.
#
# If multipart content contains the three necessary lines with correct order, but
# there are one or more lines with "--", then parser returns with value 2 (non-zero).
#
# If some of the necessary lines (usually the start or end) misses, or the order
# is wrong, then parser returns with value 1 (also a non-zero).
#
# You can choose, which one is what you need. The example below contains the
# 'strict' mode, which means if there are any lines with start of "--", then
# ModSecurity blocked the content. But the next, commented example contains
# the 'permissive' mode, then you check only if the necessary lines exists in
# correct order. Whit this, you can enable to upload PEM files (eg "----BEGIN.."),
# or other text files, which contains eg. HTTP headers.
#
# The difference is only the operator - in strict mode (first) the content blocked
# in case of any non-zero value. In permissive mode (second, commented) the
# content blocked only if the value is explicit 1. If it 0 or 2, the content will
# allowed.
#
#
# See #1747 and #1924 for further information on the possible values for
# MULTIPART_UNMATCHED_BOUNDARY.
#
SecRule MULTIPART_UNMATCHED_BOUNDARY "@eq 1" \
"id:'200004',phase:2,t:none,log,deny,msg:'Multipart parser detected a possible unmatched boundary.'"
# PCRE Tuning
# We want to avoid a potential RegEx DoS condition
#
SecPcreMatchLimit 1000
SecPcreMatchLimitRecursion 1000
# Some internal errors will set flags in TX and we will need to look for these.
# All of these are prefixed with "MSC_". The following flags currently exist:
#
# MSC_PCRE_LIMITS_EXCEEDED: PCRE match limits were exceeded.
#
SecRule TX:/^MSC_/ "!@streq 0" \
"id:'200005',phase:2,t:none,deny,msg:'ModSecurity internal error flagged: %{MATCHED_VAR_NAME}'"
# -- Response body handling --------------------------------------------------
# Allow ModSecurity to access response bodies.
# You should have this directive enabled in order to identify errors
# and data leakage issues.
#
# Do keep in mind that enabling this directive does increases both
# memory consumption and response latency.
#
SecResponseBodyAccess On
# Which response MIME types do you want to inspect? You should adjust the
# configuration below to catch documents but avoid static files
# (e.g., images and archives).
#
SecResponseBodyMimeType text/plain text/html text/xml
# Buffer response bodies of up to 512 KB in length.
SecResponseBodyLimit 524288
# What happens when we encounter a response body larger than the configured
# limit? By default, we process what we have and let the rest through.
# That's somewhat less secure, but does not break any legitimate pages.
#
SecResponseBodyLimitAction ProcessPartial
# -- Filesystem configuration ------------------------------------------------
# The location where ModSecurity stores temporary files (for example, when
# it needs to handle a file upload that is larger than the configured limit).
#
# This default setting is chosen due to all systems have /tmp available however,
# this is less than ideal. It is recommended that you specify a location that's private.
#
SecTmpDir /var/log/modsec/tmp
# The location where ModSecurity will keep its persistent data. This default setting
# is chosen due to all systems have /tmp available however, it
# too should be updated to a place that other users can't access.
#
SecDataDir /var/log/modsec/data/
# -- File uploads handling configuration -------------------------------------
# The location where ModSecurity stores intercepted uploaded files. This
# location must be private to ModSecurity. You don't want other users on
# the server to access the files, do you?
#
SecUploadDir /opt/modsecurity/var/upload/
# By default, only keep the files that were determined to be unusual
# in some way (by an external inspection script). For this to work you
# will also need at least one file inspection rule.
#
SecUploadKeepFiles Off
# Uploaded files are by default created with permissions that do not allow
# any other user to access them. You may need to relax that if you want to
# interface ModSecurity to an external program (e.g., an anti-virus).
#
SecUploadFileMode 0600
# -- Debug log configuration -------------------------------------------------
# The default debug log configuration is to duplicate the error, warning
# and notice messages from the error log.
#
SecDebugLog /var/log/modsec/debug.log
SecDebugLogLevel 3
# -- Audit log configuration -------------------------------------------------
# Log the transactions that are marked by a rule, as well as those that
# trigger a server error (determined by a 5xx or 4xx, excluding 404,
# level response status codes).
#
SecAuditEngine RelevantOnly
SecAuditLogRelevantStatus "^(?:5|4(?!04))"
# Log everything we know about a transaction.
SecAuditLogParts ABIJDEFHZ
# Use a single file for logging. This is much easier to look at, but
# assumes that you will use the audit log only ocassionally.
#
SecAuditLogType Serial
SecAuditLog /var/log/modsec_audit.log
# Specify the path for concurrent audit logging.
SecAuditLogStorageDir /var/log/modsec/audit
# -- Miscellaneous -----------------------------------------------------------
# Use the most commonly used application/x-www-form-urlencoded parameter
# separator. There's probably only one application somewhere that uses
# something else so don't expect to change this value.
#
SecArgumentSeparator &
# Settle on version 0 (zero) cookies, as that is what most applications
# use. Using an incorrect cookie version may open your installation to
# evasion attacks (against the rules that examine named cookies).
#
SecCookieFormat 0
# Specify your Unicode Code Point.
# This mapping is used by the t:urlDecodeUni transformation function
# to properly map encoded data to your language. Properly setting
# these directives helps to reduce false positives and negatives.
#
#SecUnicodeMapFile unicode.mapping 20127
# Improve the quality of ModSecurity by sharing information about your
# current ModSecurity version and dependencies versions.
# The following information will be shared: ModSecurity version,
# Web Server version, APR version, PCRE version, Lua version, Libxml2
# version, Anonymous unique id for host.
SecStatusEngine On
# ------------------------------------------------------------------------
# OWASP ModSecurity Core Rule Set ver.4.0.0-rc1
# Copyright (c) 2006-2020 Trustwave and contributors. All rights reserved.
# Copyright (c) 2021-2022 Core Rule Set project. All rights reserved.
#
# The OWASP ModSecurity Core Rule Set is distributed under
# Apache Software License (ASL) version 2
# Please see the enclosed LICENSE file for full details.
# ------------------------------------------------------------------------
#
# -- [[ Introduction ]] --------------------------------------------------------
#
# The OWASP ModSecurity Core Rule Set (CRS) is a set of generic attack
# detection rules that provide a base level of protection for any web
# application. They are written for the open source, cross-platform
# ModSecurity Web Application Firewall.
#
# See also:
# https://coreruleset.org/
# https://github.com/coreruleset/coreruleset
# https://owasp.org/www-project-modsecurity-core-rule-set/
#
#
# -- [[ System Requirements ]] -------------------------------------------------
#
# CRS requires ModSecurity version 2.8.0 or above.
# We recommend to always use the newest ModSecurity version.
#
# The configuration directives/settings in this file are used to control
# the OWASP ModSecurity CRS. These settings do **NOT** configure the main
# ModSecurity settings (modsecurity.conf) such as SecRuleEngine,
# SecRequestBodyAccess, SecAuditEngine, SecDebugLog, and XML processing.
#
# The CRS assumes that modsecurity.conf has been loaded. It is bundled with
# ModSecurity. If you don't have it, you can get it from:
# 2.x: https://raw.githubusercontent.com/SpiderLabs/ModSecurity/v2/master/modsecurity.conf-recommended
# 3.x: https://raw.githubusercontent.com/SpiderLabs/ModSecurity/v3/master/modsecurity.conf-recommended
#
# The order of file inclusion in your webserver configuration should always be:
# 1. modsecurity.conf
# 2. crs-setup.conf (this file)
# 3. rules/*.conf (the CRS rule files)
#
# Please refer to the INSTALL file for detailed installation instructions.
#
#
# -- [[ Mode of Operation: Anomaly Scoring vs. Self-Contained ]] ---------------
#
# The CRS can run in two modes:
#
# -- [[ Anomaly Scoring Mode (default) ]] --
# In CRS3, anomaly mode is the default and recommended mode, since it gives the
# most accurate log information and offers the most flexibility in setting your
# blocking policies. It is also called "collaborative detection mode".
# In this mode, each matching rule increases an 'anomaly score'.
# At the conclusion of the inbound rules, and again at the conclusion of the
# outbound rules, the anomaly score is checked, and the blocking evaluation
# rules apply a disruptive action, by default returning an error 403.
#
# -- [[ Self-Contained Mode ]] --
# In this mode, rules apply an action instantly. This was the CRS2 default.
# It can lower resource usage, at the cost of less flexibility in blocking policy
# and less informative audit logs (only the first detected threat is logged).
# Rules inherit the disruptive action that you specify (i.e. deny, drop, etc).
# The first rule that matches will execute this action. In most cases this will
# cause evaluation to stop after the first rule has matched, similar to how many
# IDSs function.
#
# -- [[ Alert Logging Control ]] --
# In the mode configuration, you must also adjust the desired logging options.
# There are three common options for dealing with logging. By default CRS enables
# logging to the webserver error log (or Event viewer) plus detailed logging to
# the ModSecurity audit log (configured under SecAuditLog in modsecurity.conf).
#
# - To log to both error log and ModSecurity audit log file, use: "log,auditlog"
# - To log *only* to the ModSecurity audit log file, use: "nolog,auditlog"
# - To log *only* to the error log file, use: "log,noauditlog"
#
# Examples for the various modes follow.
# You must leave one of the following options enabled.
# Note that you must specify the same line for phase:1 and phase:2.
#
# Default: Anomaly Scoring mode, log to error log, log to ModSecurity audit log
# - By default, offending requests are blocked with an error 403 response.
# - To change the disruptive action, see RESPONSE-999-EXCLUSION-RULES-AFTER-CRS.conf.example
# and review section 'Changing the Disruptive Action for Anomaly Mode'.
# - In Apache, you can use ErrorDocument to show a friendly error page or
# perform a redirect: https://httpd.apache.org/docs/2.4/custom-error.html
#
SecDefaultAction "phase:1,log,auditlog,pass"
SecDefaultAction "phase:2,log,auditlog,pass"
# Example: Anomaly Scoring mode, log only to ModSecurity audit log
# - By default, offending requests are blocked with an error 403 response.
# - To change the disruptive action, see RESPONSE-999-EXCLUSION-RULES-AFTER-CRS.conf.example
# and review section 'Changing the Disruptive Action for Anomaly Mode'.
# - In Apache, you can use ErrorDocument to show a friendly error page or
# perform a redirect: https://httpd.apache.org/docs/2.4/custom-error.html
#
# SecDefaultAction "phase:1,nolog,auditlog,pass"
# SecDefaultAction "phase:2,nolog,auditlog,pass"
# Example: Self-contained mode, return error 403 on blocking
# - In this configuration the default disruptive action becomes 'deny'. After a
# rule triggers, it will stop processing the request and return an error 403.
# - You can also use a different error status, such as 404, 406, et cetera.
# - In Apache, you can use ErrorDocument to show a friendly error page or
# perform a redirect: https://httpd.apache.org/docs/2.4/custom-error.html
#
# SecDefaultAction "phase:1,log,auditlog,deny,status:403"
# SecDefaultAction "phase:2,log,auditlog,deny,status:403"
# Example: Self-contained mode, redirect back to homepage on blocking
# - In this configuration the 'tag' action includes the Host header data in the
# log. This helps to identify which virtual host triggered the rule (if any).
# - Note that this might cause redirect loops in some situations; for example
# if a Cookie or User-Agent header is blocked, it will also be blocked when
# the client subsequently tries to access the homepage. You can also redirect
# to another custom URL.
# SecDefaultAction "phase:1,log,auditlog,redirect:'http://%{request_headers.host}/',tag:'Host: %{request_headers.host}'"
# SecDefaultAction "phase:2,log,auditlog,redirect:'http://%{request_headers.host}/',tag:'Host: %{request_headers.host}'"
#
# -- [[ Paranoia Level Initialization ]] ---------------------------------------
#
# The Paranoia Level (PL) setting allows you to choose the desired level
# of rule checks that will add to your anomaly scores.
#
# With each paranoia level increase, the CRS enables additional rules
# giving you a higher level of security. However, higher paranoia levels
# also increase the possibility of blocking some legitimate traffic due to
# false alarms (also named false positives or FPs). If you use higher
# paranoia levels, it is likely that you will need to add some exclusion
# rules for certain requests and applications receiving complex input.
#
# - A paranoia level of 1 is default. In this level, most core rules
# are enabled. PL1 is advised for beginners, installations
# covering many different sites and applications, and for setups
# with standard security requirements.
# At PL1 you should face FPs rarely. If you encounter FPs, please
# open an issue on the CRS GitHub site and don't forget to attach your
# complete Audit Log record for the request with the issue.
# - Paranoia level 2 includes many extra rules, for instance enabling
# many regexp-based SQL and XSS injection protections, and adding
# extra keywords checked for code injections. PL2 is advised
# for moderate to experienced users desiring more complete coverage
# and for installations with elevated security requirements.
# PL2 comes with some FPs which you need to handle.
# - Paranoia level 3 enables more rules and keyword lists, and tweaks
# limits on special characters used. PL3 is aimed at users experienced
# at the handling of FPs and at installations with a high security
# requirement.
# - Paranoia level 4 further restricts special characters.
# The highest level is advised for experienced users protecting
# installations with very high security requirements. Running PL4 will
# likely produce a very high number of FPs which have to be
# treated before the site can go productive.
#
# All rules will log their PL to the audit log;
# example: [tag "paranoia-level/2"]. This allows you to deduct from the
# audit log how the WAF behavior is affected by paranoia level.
#
# It is important to also look into the variable
# tx.enforce_bodyproc_urlencoded (Enforce Body Processor URLENCODED)
# defined below. Enabling it closes a possible bypass of CRS.
#
# Uncomment this rule to change the default:
#
#SecAction \
# "id:900000,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.blocking_paranoia_level=1"
# It is possible to execute rules from a higher paranoia level but not include
# them in the anomaly scoring. This allows you to take a well-tuned system on
# paranoia level 1 and add rules from paranoia level 2 without having to fear
# the new rules would lead to false positives that raise your score above the
# threshold.
# This optional feature is enabled by uncommenting the following rule and
# setting the tx.detection_paranoia_level.
# Technically, rules up to the level defined in tx.detection_paranoia_level
# will be executed, but only the rules up to tx.blocking_paranoia_level affect the
# anomaly scores.
# By default, tx.detection_paranoia_level is set to tx.blocking_paranoia_level.
# tx.detection_paranoia_level must not be lower than tx.blocking_paranoia_level.
#
# Please notice that setting tx.detection_paranoia_level to a higher paranoia
# level results in a performance impact that is equally high as setting
# tx.blocking_paranoia_level to said level.
#
#SecAction \
# "id:900001,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.detection_paranoia_level=1"
#
# -- [[ Enforce Body Processor URLENCODED ]] -----------------------------------
#
# ModSecurity selects the body processor based on the Content-Type request
# header. But clients are not always setting the Content-Type header for their
# request body payloads. This will leave ModSecurity with limited vision into
# the payload. The variable tx.enforce_bodyproc_urlencoded lets you force the
# URLENCODED body processor in these situations. This is off by default, as it
# implies a change of the behaviour of ModSecurity beyond CRS (the body
# processor applies to all rules, not only CRS) and because it may lead to
# false positives already on paranoia level 1. However, enabling this variable
# closes a possible bypass of CRS so it should be considered.
#
# Uncomment this rule to change the default:
#
#SecAction \
# "id:900010,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.enforce_bodyproc_urlencoded=1"
#
# -- [[ Anomaly Scoring Mode Severity Levels ]] --------------------------------
#
# Each rule in the CRS has an associated severity level.
# These are the default scoring points for each severity level.
# These settings will be used to increment the anomaly score if a rule matches.
# You may adjust these points to your liking, but this is usually not needed.
#
# - CRITICAL severity: Anomaly Score of 5.
# Mostly generated by the application attack rules (93x and 94x files).
# - ERROR severity: Anomaly Score of 4.
# Generated mostly from outbound leakage rules (95x files).
# - WARNING severity: Anomaly Score of 3.
# Generated mostly by malicious client rules (91x files).
# - NOTICE severity: Anomaly Score of 2.
# Generated mostly by the protocol rules (92x files).
#
# In anomaly mode, these scores are cumulative.
# So it's possible for a request to hit multiple rules.
#
# (Note: In this file, we use 'phase:1' to set CRS configuration variables.
# In general, 'phase:request' is used. However, we want to make absolutely sure
# that all configuration variables are set before the CRS rules are processed.)
#
#SecAction \
# "id:900100,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.critical_anomaly_score=5,\
# setvar:tx.error_anomaly_score=4,\
# setvar:tx.warning_anomaly_score=3,\
# setvar:tx.notice_anomaly_score=2"
#
# -- [[ Anomaly Scoring Mode Blocking Threshold Levels ]] ----------------------
#
# Here, you can specify at which cumulative anomaly score an inbound request,
# or outbound response, gets blocked.
#
# Most detected inbound threats will give a critical score of 5.
# Smaller violations, like violations of protocol/standards, carry lower scores.
#
# [ At default value ]
# If you keep the blocking thresholds at the defaults, the CRS will work
# similarly to previous CRS versions: a single critical rule match will cause
# the request to be blocked and logged.
#
# [ Using higher values ]
# If you want to make the CRS less sensitive, you can increase the blocking
# thresholds, for instance to 7 (which would require multiple rule matches
# before blocking) or 10 (which would require at least two critical alerts - or
# a combination of many lesser alerts), or even higher. However, increasing the
# thresholds might cause some attacks to bypass the CRS rules or your policies.
#
# [ New deployment strategy: Starting high and decreasing ]
# It is a common practice to start a fresh CRS installation with elevated
# anomaly scoring thresholds (>100) and then lower the limits as your
# confidence in the setup grows. You may also look into the Sampling
# Percentage section below for a different strategy to ease into a new
# CRS installation.
#
# [ Anomaly Threshold / Paranoia Level Quadrant ]
#
# High Anomaly Limit | High Anomaly Limit
# Low Paranoia Level | High Paranoia Level
# -> Fresh Site | -> Experimental Site
# ------------------------------------------------------
# Low Anomaly Limit | Low Anomaly Limit
# Low Paranoia Level | High Paranoia Level
# -> Standard Site | -> High Security Site
#
# Uncomment this rule to change the defaults:
#
#SecAction \
# "id:900110,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.inbound_anomaly_score_threshold=5,\
# setvar:tx.outbound_anomaly_score_threshold=4"
#
# -- [[ Application Specific Rule Exclusions ]] --------------------------------
#
# CRS 3.x contained exclusion packages to tweak the CRS for use with common
# web applications, lowering the number of false positives.
#
# In CRS 4, these are no longer part of the CRS itself, but they are available
# as "CRS plugins". Some plugins improve support for web applications, and others
# may bring new functionality. Plugins are not installed by default, but can be
# downloaded from the plugin registry:
# https://github.com/coreruleset/plugin-registry
#
# For detailed information about using and installing plugins, please see:
# https://coreruleset.org/docs/configuring/plugins/
#
# -- [[ Anomaly Score Reporting Level ]] ---------------------------------------
#
# When a request is blocked due to the anomaly score meeting or exceeding the
# anomaly threshold then the blocking rule will also report the anomaly score.
# This applies to the separate inbound and outbound anomaly scores.
#
# In phase 5, there are additional rules that can perform additional reporting
# of anomaly scores with a verbosity that depends on the reporting level defined
# below.
#
# By setting the reporting level you control whether you want additional
# reporting beyond the blocking rule or not and, if yes, which requests should
# be covered. The higher the reporting level, the more verbose the reporting is.
#
# There are 6 reporting levels:
#
# 0 - Reporting disabled
# 1 - Reporting for requests with a blocking anomaly score >= a threshold
# 2 - Reporting for requests with a detection anomaly score >= a threshold
# 3 - Reporting for requests with a blocking anomaly score greater than 0
# 4 - Reporting for requests with a detection anomaly score greater than 0
# 5 - Reporting for all requests
#
# Note: Reporting levels 1 and 2 make it possible to differentiate between
# requests that are blocked and requests that are *not* blocked but would have
# been blocked if the blocking PL was equal to detection PL. This may be useful
# for certain FP tuning methodologies, for example moving to a higher PL.
#
# A value of 5 can be useful on platforms where you are interested in logging
# non-scoring requests, yet it is not possible to report this information in
# the request/access log. This applies to Nginx, for example.
#
#SecAction \
# "id:900115,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.reporting_level=4"
#
# -- [[ Early Anomaly Scoring Mode Blocking ]] ------------------------------
#
# The anomaly scores for the request and the responses are generally summed up
# and evaluated at the end of phase:2 and at the end of phase:4 respectively.
# However, it is possible to enable an early evaluation of these anomaly scores
# at the end of phase:1 and at the end of phase:3.
#
# If a request (or a response) hits the anomaly threshold in this early
# evaluation, then blocking happens immediately (if blocking is enabled) and
# the phase 2 (and phase 4 respectively) will no longer be executed.
#
# Enable the rule 900120 that sets the variable tx.early_blocking to 1 in order
# to enable early blocking. The variable tx.early_blocking is set to 0 by
# default. Early blocking is thus disabled by default.
#
# Please note that early blocking will hide potential alerts from you. This
# means that a payload that would appear in an alert in phase 2 (or phase 4)
# does not get evaluated if the request is being blocked early. So when you
# disabled early blocking again at some point in the future, then new alerts
# from phase 2 might pop up.
#SecAction \
# "id:900120,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.early_blocking=1"
#
# -- [[ HTTP Policy Settings ]] ------------------------------------------------
#
# This section defines your policies for the HTTP protocol, such as:
# - allowed HTTP versions, HTTP methods, allowed request Content-Types
# - forbidden file extensions (e.g. .bak, .sql) and request headers (e.g. Proxy)
#
# These variables are used in the following rule files:
# - REQUEST-911-METHOD-ENFORCEMENT.conf
# - REQUEST-920-PROTOCOL-ENFORCEMENT.conf
# HTTP methods that a client is allowed to use.
# Default: GET HEAD POST OPTIONS
# Example: for RESTful APIs, add the following methods: PUT PATCH DELETE
# Example: for WebDAV, add the following methods: CHECKOUT COPY DELETE LOCK
# MERGE MKACTIVITY MKCOL MOVE PROPFIND PROPPATCH PUT UNLOCK
# Uncomment this rule to change the default.
#SecAction \
# "id:900200,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:'tx.allowed_methods=GET HEAD POST OPTIONS'"
# Content-Types that a client is allowed to send in a request.
# Default: |application/x-www-form-urlencoded| |multipart/form-data| |multipart/related|
# |text/xml| |application/xml| |application/soap+xml| |application/x-amf| |application/json|
# |application/cloudevents+json| |application/cloudevents-batch+json| |application/octet-stream|
# |application/csp-report| |application/xss-auditor-report| |text/plain|
# Uncomment this rule to change the default.
#
# Please note, that the rule where CRS uses this variable (920420) evaluates it with operator
# `@within`, which is case sensitive, but uses t:lowercase. You must add your whole custom
# Content-Type with lowercase.
#
#SecAction \
# "id:900220,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:'tx.allowed_request_content_type=|application/x-www-form-urlencoded| |multipart/form-data| |multipart/related| |text/xml| |application/xml| |application/soap+xml| |application/x-amf| |application/json| |application/cloudevents+json| |application/cloudevents-batch+json| |application/octet-stream| |application/csp-report| |application/xss-auditor-report| |text/plain|'"
# Allowed HTTP versions.
# Default: HTTP/1.0 HTTP/1.1 HTTP/2 HTTP/2.0
# Example for legacy clients: HTTP/0.9 HTTP/1.0 HTTP/1.1 HTTP/2 HTTP/2.0
# Note that some web server versions use 'HTTP/2', some 'HTTP/2.0', so
# we include both version strings by default.
# Uncomment this rule to change the default.
#SecAction \
# "id:900230,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:'tx.allowed_http_versions=HTTP/1.0 HTTP/1.1 HTTP/2 HTTP/2.0'"
# Forbidden file extensions.
# Guards against unintended exposure of development/configuration files.
# Default: .asa/ .asax/ .ascx/ .axd/ .backup/ .bak/ .bat/ .cdx/ .cer/ .cfg/ .cmd/ .com/ .config/ .conf/ .cs/ .csproj/ .csr/ .dat/ .db/ .dbf/ .dll/ .dos/ .htr/ .htw/ .ida/ .idc/ .idq/ .inc/ .ini/ .key/ .licx/ .lnk/ .log/ .mdb/ .old/ .pass/ .pdb/ .pol/ .printer/ .pwd/ .rdb/ .resources/ .resx/ .sql/ .swp/ .sys/ .vb/ .vbs/ .vbproj/ .vsdisco/ .webinfo/ .xsd/ .xsx/
# Example: .bak/ .config/ .conf/ .db/ .ini/ .log/ .old/ .pass/ .pdb/ .rdb/ .sql/
# Uncomment this rule to change the default.
#SecAction \
# "id:900240,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:'tx.restricted_extensions=.asa/ .asax/ .ascx/ .axd/ .backup/ .bak/ .bat/ .cdx/ .cer/ .cfg/ .cmd/ .com/ .config/ .conf/ .cs/ .csproj/ .csr/ .dat/ .db/ .dbf/ .dll/ .dos/ .htr/ .htw/ .ida/ .idc/ .idq/ .inc/ .ini/ .key/ .licx/ .lnk/ .log/ .mdb/ .old/ .pass/ .pdb/ .pol/ .printer/ .pwd/ .rdb/ .resources/ .resx/ .sql/ .swp/ .sys/ .vb/ .vbs/ .vbproj/ .vsdisco/ .webinfo/ .xsd/ .xsx/'"
# Forbidden request headers.
# Header names should be lowercase, enclosed by /slashes/ as delimiters.
# Blocking Proxy header prevents 'httpoxy' vulnerability: https://httpoxy.org
# Default: /proxy/ /lock-token/ /content-range/ /if/ /user-agentt/
# Uncomment this rule to change the default.
#SecAction \
# "id:900250,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:'tx.restricted_headers=/proxy/ /lock-token/ /content-range/ /if/ /user-agentt/'"
# Content-Types charsets that a client is allowed to send in a request.
# The content-types are enclosed by |pipes| as delimiters to guarantee exact matches.
# Default: |utf-8| |iso-8859-1| |iso-8859-15| |windows-1252|
# Uncomment this rule to change the default.
#SecAction \
# "id:900280,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:'tx.allowed_request_content_type_charset=|utf-8| |iso-8859-1| |iso-8859-15| |windows-1252|'"
#
# -- [[ HTTP Argument/Upload Limits ]] -----------------------------------------
#
# Here you can define optional limits on HTTP get/post parameters and uploads.
# This can help to prevent application specific DoS attacks.
#
# These values are checked in REQUEST-920-PROTOCOL-ENFORCEMENT.conf.
# Beware of blocking legitimate traffic when enabling these limits.
#
# Block request if number of arguments is too high
# Default: unlimited
# Example: 255
# Uncomment this rule to set a limit.
#SecAction \
# "id:900300,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.max_num_args=255"
# Block request if the length of any argument name is too high
# Default: unlimited
# Example: 100
# Uncomment this rule to set a limit.
#SecAction \
# "id:900310,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.arg_name_length=100"
# Block request if the length of any argument value is too high
# Default: unlimited
# Example: 400
# Uncomment this rule to set a limit.
#SecAction \
# "id:900320,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.arg_length=400"
# Block request if the total length of all combined arguments is too high
# Default: unlimited
# Example: 64000
# Uncomment this rule to set a limit.
#SecAction \
# "id:900330,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.total_arg_length=64000"
# Block request if the file size of any individual uploaded file is too high
# Default: unlimited
# Example: 1048576
# Uncomment this rule to set a limit.
#SecAction \
# "id:900340,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.max_file_size=1048576"
# Block request if the total size of all combined uploaded files is too high
# Default: unlimited
# Example: 1048576
# Uncomment this rule to set a limit.
#SecAction \
# "id:900350,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.combined_file_sizes=1048576"
#
# -- [[ Easing In / Sampling Percentage ]] -------------------------------------
#
# Adding the Core Rule Set to an existing productive site can lead to false
# positives, unexpected performance issues and other undesired side effects.
#
# It can be beneficial to test the water first by enabling the CRS for a
# limited number of requests only and then, when you have solved the issues (if
# any) and you have confidence in the setup, to raise the ratio of requests
# being sent into the ruleset.
#
# Adjust the percentage of requests that are funnelled into the Core Rules by
# setting TX.sampling_percentage below. The default is 100, meaning that every
# request gets checked by the CRS. The selection of requests, which are going
# to be checked, is based on a pseudo random number generated by ModSecurity.
#
# If a request is allowed to pass without being checked by the CRS, there is no
# entry in the audit log (for performance reasons), but an error log entry is
# written. If you want to disable the error log entry, then issue the
# following directive somewhere after the inclusion of the CRS
# (E.g., RESPONSE-999-EXCLUSION-RULES-AFTER-CRS.conf).
#
# SecRuleUpdateActionById 901450 "nolog"
#
# ATTENTION: If this TX.sampling_percentage is below 100, then some of the
# requests will bypass the Core Rules completely and you lose the ability to
# protect your service with ModSecurity.
#
# Uncomment this rule to enable this feature:
#
#SecAction "id:900400,\
# phase:1,\
# pass,\
# nolog,\
# setvar:tx.sampling_percentage=100"
#
# -- [[ Check UTF-8 encoding ]] ------------------------------------------------
#
# The CRS can optionally check request contents for invalid UTF-8 encoding.
# We only want to apply this check if UTF-8 encoding is actually used by the
# site; otherwise it will result in false positives.
#
# Uncomment this rule to use this feature:
#
#SecAction \
# "id:900950,\
# phase:1,\
# nolog,\
# pass,\
# t:none,\
# setvar:tx.crs_validate_utf8_encoding=1"
#
# -- [[ Collection timeout ]] --------------------------------------------------
#
# Set the SecCollectionTimeout directive from the ModSecurity default (1 hour)
# to a lower setting which is appropriate to most sites.
# This increases performance by cleaning out stale collection (block) entries.
#
# This value should be greater than or equal to any block durations or timeouts
# set by plugins that make use of ModSecurity's persistent collections (e.g. the
# DoS protection and IP reputation plugins).
#
# Ref: https://github.com/SpiderLabs/ModSecurity/wiki/Reference-Manual-(v2.x)#SecCollectionTimeout
# Please keep this directive uncommented.
# Default: 600 (10 minutes)
SecCollectionTimeout 600
#
# -- [[ End of setup ]] --------------------------------------------------------
#
# The CRS checks the tx.crs_setup_version variable to ensure that the setup
# has been loaded. If you are not planning to use this setup template,
# you must manually set the tx.crs_setup_version variable before including
# the CRS rules/* files.
#
# The variable is a numerical representation of the CRS version number.
# E.g., v3.0.0 is represented as 300.
#
SecAction \
"id:900990,\
phase:1,\
nolog,\
pass,\
t:none,\
setvar:tx.crs_setup_version=400"
Include /usr/share/owasp-modsecurity-crs/rules/*.conf